Huawei CloudEngine 5800 Data Center Switches
Maximum Power Consumption: 92W
QoS: Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
Dimensions (W x D x H): 442 mm x 420 mm x 43.6 mm
IPv6: IPv6 Neighbor Discovery (ND) (not supported by CE5855)
Reliability: LACP
Switching Capacity: 176 Gbit/s
Multicast: IGMP, PIM-SM, PIM-DM, MSDP, and MBGP
MAC Address Table: maximum: 32k
VLAN: Adding access, trunk, and hybrid interfaces to VLANs
Environmental Parameters: Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)
SFP+ Ports: 4
QSFP+ Ports: -
Operating Voltage: AC: 90V to 290V
Traffic Analysis: NetStream
IP Routing: IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
ACL: ingress: 4.5k egress: 1k
Configuration and Maintenance: Console, Telnet, and SSH terminals
Security and Management: 802.1x authentication
Airflow Design: Front-to-back or back-to-front
Device Virtualization: iStack
Network Virtualization: M-LAG
VM Awareness: Agile Controller
ARP (maximum): 8k
IPv4 FIB (maximum): 12k
IPv6 FIB (maximum): 6k
Multicast FIB (maximum): 8k
Weight (fully loaded): 8.2 kg (18.1 lb)
Base-T Ports: 48
Forwarding Rates: 132 Mpps
SDN: Open Programmability System (OPS)
Файлы: https://www.router-switch.com/huawei-ce5810-48t4s-ei-f-datasheet-pdf.html
CE5810-48T4S-EI-F is one of the Huawei CE5810-48T4S-EI Switches. Huawei CE5810-48T4S-EI provides 48 * GE line-speed ports plus 4 * 10 GE upstream ports for stacking up to 16 switches. 10 GE ports enable creation of a non-blocking stack that can extend across geographical distances between data centers. Using the Huawei VRP8 software platform, CE5800 switches support Transparent Interconnection of Lots of Links (TRILL) and have a high stacking capability (up to 16-member switches in a stack system). In addition, the airflow direction (front-to-back or back-to-front) can be changed. CE5800 switches can work with CE12800 switches to build an elastic, virtualized, high-quality fabric that meets the requirements of cloud-computing data centers. CE5800 switches provide high-density GE access to help enterprises build a scalable data center network platform for cloud computing. They can also be used as aggregation or access switches for enterprise campus networks.
Quick Specs
Figure 1 shows the appearance of CE5810-48T4S-EI-F.
Table 1 shows the Quick Specs.
|
Product Code |
CE5810-48T4S-EI-F |
|
Part Number |
02350EYW |
|
Software Version |
V100R002C00 and later |
|
Base-T Ports |
48 |
|
SFP+ Ports |
4 |
|
QSFP+ Ports |
0 |
|
Switching Capacity |
176 Gbit/s |
|
Forwarding Rate |
132 Mpps |
|
Rated voltage range(with power module) |
100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC |
|
Maximum power consumption |
92W |
|
Airflow |
Front-to-back or back-to-front |
|
Dimensions (W x D x H) |
442 mm x 420 mm x 43.6 mm |
|
Weight (fully loaded) |
8.2 kg (18.1 lb) |
Product Details
Figure 2 shows the CE5810-48T4S-EI-F rear view (port side).
Note:
|
_ |
Forty-eight 10/100/1000BASE-T Ethernet electrical ports |
|
_ |
Four 10GE SFP+ Ethernet optical ports |
Figure 3 shows the CE5810-48T4S-EI-F front view (power supply side).
Note:
|
_ |
Power supply slot 1 |
|
_ |
Fan slot 1 |
|
_ |
Console port |
|
_ |
ETH management port |
|
_ |
Bar code label |
|
_ |
USB port |
|
_ |
Fan slot 2 |
|
_ |
Power supply slot 2 |
The Modules
Table 2 shows the recommended elements for the CE5810-48T4S-EI-F.
|
Model |
Description |
|
GE-SFP Optical Transceiver |
|
|
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
|
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
|
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
|
10G-SFP+ Optical Transceiver |
|
|
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
|
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
|
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
|
GE Copper Transceiver |
|
|
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
|
FAN-40SB |
|
|
Fan box(SB,Front to Back,FAN panel side intake) |
|
|
Fan box(SB,Back to Front,FAN panel side exhaust) |
|
Compare to Similar Items
Table 3 shows the comparison of CE5810-48T4S-EI-F and CE5810-24T4S-EI-B.
|
Product Code |
CE5810-48T4S-EI-F |
|
|
Part Number |
02350EYX |
02350EYH |
|
Software Version |
V100R002C00 and later |
V100R002C00 and later |
|
Base-T Ports |
48 |
24 |
|
SFP+ Ports |
4 |
4 |
|
QSFP+ Ports |
0 |
0 |
|
Switching Capacity |
176 Gbit/s |
128 Gbit/s |
|
Forwarding Rate |
132 Mpps |
96 Mpps |
|
Maximum power consumption |
92W |
68 W |
Get more information
Do you have any question about the CE5810-48T4S-EI-F
Contact us now via Live Chat or [email protected].