J8693-69001 Переключатель
J8693-69001 Переключатель
19 714
руб.
Есть в наличии
Количество:
Артикул:
J8693-69001
Тип товара:
Переключатель
Альтернативные партийные номера:
Краткое описание: 3500-48G-PoE yl Switch
brand_ice: HP
Co2 Savings: 343.78
Rack mounting: Yes
Stackable: Yes
Form factor: 1U
Colour of product: Grey
Switch type: Managed
Switch layer: L3
Quality of Service (QoS) support: Yes
Web-based management: Yes
MIB support: Yes
Basic switching RJ-45 Ethernet ports quantity: 48
Basic switching RJ-45 Ethernet ports type: 1 GbE Copper
Combo SFP ports quantity: 4
Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
10G support: Yes
IP routing: Yes
Full duplex: Yes
Routing entries: 10000
Auto-sensing: Yes
Rate limiting: Yes
Spanning tree protocol: Yes
Auto MDI/MDI-X: Yes
Flow control support: Yes
Link aggregation: Yes
VLAN support: Yes
MAC address table: 64000 entries
Switching capacity: 149.8 Gbit/s
Throughput: 111.5 Mpps
Latency (1 Gbps): 3.4 µs
Latency (10 Gbps): 2.1 µs
Jumbo frames support: Yes
DHCP features: DHCP server, DHCP client
Access Control List (ACL): Yes
IGMP snooping: Yes
SSH/SSL support: Yes
MAC address filtering: Yes
Multicast support: Yes
Built-in processor: Yes
Processor model: PowerPC MPC8540
Processor frequency: 666 MHz
Memory type: DDR-SDRAM
Internal memory: 256 MB
Flash memory: 4 MB
AC input voltage: 100 - 240 V
AC input frequency: 50 - 60 Hz
Power consumption (typical): 142 W
Power over Ethernet (PoE): Yes
Total Power over Ethernet (PoE) budget: 398 W
Heat dissipation: 1144 BTU/h
Width: 443 mm
Depth: 430 mm
Height: 44 mm
Weight: 7.3 kg
brand_ice: HP
Co2 Savings: 343.78
Rack mounting: Yes
Stackable: Yes
Form factor: 1U
Colour of product: Grey
Switch type: Managed
Switch layer: L3
Quality of Service (QoS) support: Yes
Web-based management: Yes
MIB support: Yes
Basic switching RJ-45 Ethernet ports quantity: 48
Basic switching RJ-45 Ethernet ports type: 1 GbE Copper
Combo SFP ports quantity: 4
Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
10G support: Yes
IP routing: Yes
Full duplex: Yes
Routing entries: 10000
Auto-sensing: Yes
Rate limiting: Yes
Spanning tree protocol: Yes
Auto MDI/MDI-X: Yes
Flow control support: Yes
Link aggregation: Yes
VLAN support: Yes
MAC address table: 64000 entries
Switching capacity: 149.8 Gbit/s
Throughput: 111.5 Mpps
Latency (1 Gbps): 3.4 µs
Latency (10 Gbps): 2.1 µs
Jumbo frames support: Yes
DHCP features: DHCP server, DHCP client
Access Control List (ACL): Yes
IGMP snooping: Yes
SSH/SSL support: Yes
MAC address filtering: Yes
Multicast support: Yes
Built-in processor: Yes
Processor model: PowerPC MPC8540
Processor frequency: 666 MHz
Memory type: DDR-SDRAM
Internal memory: 256 MB
Flash memory: 4 MB
AC input voltage: 100 - 240 V
AC input frequency: 50 - 60 Hz
Power consumption (typical): 142 W
Power over Ethernet (PoE): Yes
Total Power over Ethernet (PoE) budget: 398 W
Heat dissipation: 1144 BTU/h
Width: 443 mm
Depth: 430 mm
Height: 44 mm
Weight: 7.3 kg
HP ProCurve 3500-48G-PoE yl. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48. Full duplex. MAC address table: 64000 entries, Switching capacity: 149.8 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. Power over Ethernet (PoE). Rack mounting, Form factor: 1U
The HP 3500 Switch Series consists of advanced intelligent-edge switches, available in 24-port and 48-port fixed-port models. The foundation for these switches is a purpose-built, programmable HP ProVision ASIC that allows the most demanding networking features, such as quality of service (QoS) and security, to be implemented in a scalable yet granular fashion.
With a variety of Gigabit Ethernet and 10/100 interfaces; integrated PoE+, PoE, and non-PoE options; and versatile 10GbE connectivity (CX4, X2, and SFP+) on Gigabit Ethernet switches, the 3500 Switch Series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.
Features
Software-defined networking
- OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths
Quality of Service (QoS)
- Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
- Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues
- Bandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced increased bandwidth. Classifier-based rate limiting: uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port. Reduced bandwidth: provides per-port, per-queue egress-based reduced bandwidth.
- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Management
- Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch anywhere on the network
- RMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
- IEEE 802.1AB Link Layer Discovery Protocol (LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
- Uni-Directional Link Detection (UDLD): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
- Management simplicity: common software features and CLI implementation across all ProVision-based switches (including the zl and yl switches)
Connectivity
- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
- IEEE 802.3at Power over Ethernet Plus (PoE+): provides up to 30 W per port to IEEE 802.3 for devices that use PoE/PoE+, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
- Prestandard PoE support: detects and provides power to prestandard PoE devices
- Jumbo frames: on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
- Auto-MDIX: provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
The HP 3500 Switch Series consists of advanced intelligent-edge switches, available in 24-port and 48-port fixed-port models. The foundation for these switches is a purpose-built, programmable HP ProVision ASIC that allows the most demanding networking features, such as quality of service (QoS) and security, to be implemented in a scalable yet granular fashion.
With a variety of Gigabit Ethernet and 10/100 interfaces; integrated PoE+, PoE, and non-PoE options; and versatile 10GbE connectivity (CX4, X2, and SFP+) on Gigabit Ethernet switches, the 3500 Switch Series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.
Features
Software-defined networking
- OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths
Quality of Service (QoS)
- Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
- Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues
- Bandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced increased bandwidth. Classifier-based rate limiting: uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port. Reduced bandwidth: provides per-port, per-queue egress-based reduced bandwidth.
- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Management
- Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch anywhere on the network
- RMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
- IEEE 802.1AB Link Layer Discovery Protocol (LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
- Uni-Directional Link Detection (UDLD): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
- Management simplicity: common software features and CLI implementation across all ProVision-based switches (including the zl and yl switches)
Connectivity
- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
- IEEE 802.3at Power over Ethernet Plus (PoE+): provides up to 30 W per port to IEEE 802.3 for devices that use PoE/PoE+, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
- Prestandard PoE support: detects and provides power to prestandard PoE devices
- Jumbo frames: on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
- Auto-MDIX: provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
-
10G supportYes
-
AC input frequency50 - 60 Hz
-
AC input voltage100 - 240 V
-
Access Control List (ACL)Yes
-
Auto MDI/MDI-XYes
-
Auto-sensingYes
-
Basic switching RJ-45 Ethernet ports quantity48
-
Basic switching RJ-45 Ethernet ports type1 GbE Copper
-
Built-in processorYes
-
Co2 Savings343.78
-
Colour of productGrey
-
Combo SFP ports quantity4
-
Depth430 mm
-
DHCP featuresDHCP server, DHCP client
-
Flash memory4 MB
-
Flow control supportYes
-
Form Factor1U
-
Full duplexYes
-
Heat dissipation1144 BTU/h
-
Height44 mm
-
IGMP snoopingYes
-
Internal memory256 MB
-
IP routingYes
-
Jumbo frames supportYes
-
Latency (1 Gbps)3.4 µs
-
Latency (10 Gbps)2.1 µs
-
Link aggregationYes
-
MAC address filteringYes
-
MAC address table64000 entries
-
Memory typeDDR-SDRAM
-
MIB supportYes
-
Multicast supportYes
-
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u
-
Power consumption (typical)142 W
-
Power over Ethernet (PoE)Yes
-
Processor frequency666 MHz
-
Processor modelPowerPC MPC8540
-
Quality of Service (QoS) supportYes
-
Rack mountingYes
-
Rate limitingYes
-
Routing entries10000
-
Spanning tree protocolYes
-
SSH/SSL supportYes
-
StackableYes
-
Switch layerL3
-
Switch typeManaged
-
Switching capacity149.8 Gbit/s
-
Throughput111.5 Mpps
-
Total Power over Ethernet (PoE) budget398 W
-
VLAN supportYes
-
Web-based managementYes
-
Weight7.3 kg
-
Width443 mm
-
ПроизводительHP
-
Тип товараПереключатель
С этим товаром покупают
Похожие товары